| Item no. | 67610066 |
| Brand | Dichtomatik |
| Material | NBR |
| net weight | 0.37 Gram |
| Packaging Unit | 1 |
| Design | WAO |
| NEW - Inner diameter (d1) | 8 mm |
| NEW - Outside diameter (d2) | 12 mm |
| NEW - Seal width (b) | 3 mm |
| Material | NBR |
| Quantity per PC |
Per piece |
|---|---|
| 1+ | € 10,0000 |
| 2+ | € 5,0000 |
| 5+ | € 2,0000 |
| 10+ | € 1,0000 |
| 20+ | € 0,6650 |
| 50+ | € 0,5612 |
| 100+ | € 0,5348 |
| 200+ | € 0,5058 |
| 500+ | € 0,4030 |
| 1000+ | € 0,3748 |
| 2500+ | € 0,3708 |
| 5000+ | € 0,3668 |
| Article number | 67610066 |
| Design | |
| Design | WAO |
| Dimensions | |
| NEW - Inner diameter (d1) | 8 mm |
| NEW - Outside diameter (d2) | 12 mm |
| NEW - Seal width (b) | 3 mm |
| Dimensions | 8x12x3 |
| General | |
| Unit | pcs |
| Identification | |
| Brand | Dichtomatik |
| Catalog item | check |
| Logistics | |
| country of origin | TW |
| HS-code | 40169300 |
| net weight | 0.37 Gram |
| Material | |
| Material | NBR |
| Compound | 70 NBR NB704604 |
| Packaging | |
| Packaging description | 1 |
| Packaging Unit | 1 |
| Also found under | |
| Dichtomatik Products | Dichtomatik Radial Shaft Seals Dichtomatik | Radial Shaft Seals Dichtomatik | |
The Wellendichtring - 8x12x3 - WAO - 70 NBR NB704604 - Dichtomatik - 67610066 - Verpackungseinheit 1 is a WAO oil seal from Dichtomatik with dimensions of 8x12x3 mm. The oil seal has an inside diameter of 8 mm, an outside diameter of 12 mm and a width of 3 mm. This version is manufactured from NBR with compound 70 NBR NB704604 and has article number 67610066.
The WAO profile is a radial shaft seal without a tension spring or additional protective lip. Its unsprung sealing lip dynamically seals a rotating shaft independently of its direction of rotation. The profile is suitable for sealing grease and as a subordinate seal against dust, dirt or splash water. The rubberized outer jacket provides a secure fit and static seal in the housing bore. When the shaft is stationary, the sealing lip provides only limited static sealing.
This NBR WAO oil seal can be used at temperatures from -40 to +80 °C and for short periods up to +100 °C. NBR offers good resistance to various mineral oils and greases and to H, HL and HLP hydraulic fluids. It can also be used with HFA and HFB fluids and with HFC up to approximately +50 °C. For water, the maximum temperature is +60 °C. NBR has low resistance to ozone, weathering and ageing. The WAO profile has a maximum pressure limit of 0 MPa and a maximum peripheral speed of 6 m/s. The stated maximum values may not all be reached simultaneously.
Nederlands 
Deutsch 
