| Item no. | 67019593 |
| Brand | Dichtomatik |
| Material | NBR |
| net weight | 45 Gram |
| Packaging Unit | 1 |
| Design | WAD |
| NEW - Inner diameter (d1) | 55 mm |
| NEW - Outside diameter (d2) | 80 mm |
| NEW - Seal width (b) | 10 mm |
| Material | NBR |
| Stock | Delivery time |
|---|---|
| 637 | Shipping in 3-5 days |
| Quantity per PC |
Per piece |
|---|---|
| 1+ | € 10,0000 |
| 2+ | € 5,0000 |
| 5+ | € 3,5960 |
| 10+ | € 3,5940 |
| 20+ | € 3,0560 |
| 50+ | € 25,1920 |
| 100+ | € 2,3230 |
| 200+ | € 2,1750 |
| 500+ | € 18,3040 |
| 1000+ | € 1,7160 |
| 2500+ | € 16,9960 |
| 5000+ | € 16,8340 |
| In stock | Yes, 637 pcs |
| Article number | 67019593 |
| Design | |
| Design | WAD |
| Dimensions | |
| NEW - Inner diameter (d1) | 55 mm |
| NEW - Outside diameter (d2) | 80 mm |
| NEW - Seal width (b) | 10 mm |
| Dimensions | 55x80x10 |
| General | |
| Unit | pcs |
| Identification | |
| Brand | Dichtomatik |
| Catalog item | check |
| Logistics | |
| country of origin | TW |
| HS-code | 84879090 |
| net weight | 45 Gram |
| Material | |
| Material | NBR |
| Compound | 70 NBR NB703412 |
| Packaging | |
| Packaging description | 1 |
| Packaging Unit | 1 |
| Also found under | |
| Dichtomatik Products | Dichtomatik Radial Shaft Seals Dichtomatik | Radial Shaft Seals Dichtomatik | |
The Oil Seal - 55x80x10 - WAD - 70 NBR NB703412 - Dichtomatik - 67019593 - Packaging Unit 1 is a WAD oil seal from Dichtomatik with an inside diameter of 55 mm, an outside diameter of 80 mm and a width of 10 mm. The overall dimensions are 55x80x10. The oil seal is manufactured from NBR, using compound 70 NBR NB703412. It is Dichtomatik article number 67019593.
The WAD profile is a double-acting radial shaft seal with two opposed sealing lips. Both sealing lips are pressed against the shaft by tension springs and are primarily used to keep two different media separated. The profile has no separate protective lip. The fully rubberized outer jacket ensures a tight fit and static seal in the housing bore. Its sealing function is independent of the direction of rotation and it also provides a good static seal at standstill. The space between the sealing lips can be filled with approximately 40% grease during installation.
The NBR version is suitable for temperatures from -40 to +80 °C and for short-term exposure up to +100 °C. The maximum pressure is 0.03 MPa and the maximum peripheral speed is 6 m/s. NBR offers good resistance to various mineral oils and greases (H, HL and HLP), HFA and HFB fluids, HFC up to approximately +50 °C and water up to a maximum of +60 °C. Its resistance to ozone, weathering and ageing is low. The material must be suitable for the media on both sides of the seal. The specified maximum values may not all be reached at the same time.
Nederlands 
Deutsch 
